Differences

This shows you the differences between two versions of the page.

--- m17:welcome [2021/10/22 20:24] – nicolas
+++ m17:welcome [2021/11/14 21:49] (current) – [Module 17] nicolas
@@ Line 1: / Line 1: @@
-====== M17 Project Notes - 22/10/21 ======
+====== OpenWebRX and Pi MMDVM Hotspot Based M17 Transceiver - 29/10/21 ======
 ==== Introduction ====
@@ Line 85: / Line 85: @@
 cd MMDVM_HS
 git checkout M17
+</code>
+Load Flash Tools
+<code>
+cd ~
+git clone https://git.code.sf.net/p/stm32flash/code stm32flash
+cd stm32flash
+make
+sudo make install
 </code>
@@ Line 97: / Line 107: @@
 # comment out other // Led option
 make
+# Flash
 sudo make mmdvm_hs_hat
 </code>
@@ Line 141: / Line 153: @@
 ** Running the M17 Transceiver GUI remotely **
-Run the Tranceiver GUI on another machine and pipe the audio to it
+<code>
+# Configure for correct M17Client server
+nano .M17GUI
+DaemonAddress=192.168.0.112
+DaemonPort=7658
+SelfAddress=192.168.0.12
+SelfPort=7659
+Channel=M17 Calling
+Destination=ALL
+Volume=84
+Metric=1
+</code>
+Run the Tranceiver GUI on another machine and pipe the audio to it using PulseAudio
 https://github.com/g4klx/M17Client/blob/1a4b39b1e3c96fdd54d2731b5e96b59f0ad3a028/PulseAudio.md
@@ Line 153: / Line 181: @@
 ======Notes======
-====Module 17====
-A standalone smart microphone that transforms any 9600 baud capable transceiver into an M17 compatible radio. It is based on a STM32F4 microcontroller and is designed to run the [[https://openrtx.org/|OpenRTX]] firmware. Audio and PTT connectivity is given through a "Kenwood 2 Pin" compatible connector (2.5 and 3.5mm audio jacks).
-https://github.com/M17-Project/Module_17
@@ Line 219: / Line 243: @@
                                 driver without need of hciattach/btattach
+</code>
+====Linux Notes====
+https://www.pragmaticlinux.com/2020/12/how-to-clone-your-raspberry-pi-sd-card-in-linux/
+<code>
+lsblk -p
+# Copy SD to image file
+sudo dd bs=4M if=/dev/sdb of=~/Downloads/m17trx.img conv=fsync
+sudo chown $USER: ~/Downloads/m17trx.img
+sudo pishrink ~/Downloads/m17trx.img
+# Copy image file to SD
+# Using Raspberry imager
 </code>