Differences

This shows you the differences between two versions of the page.

--- pinetime_introduction [2022/02/19 22:21] – [Development] nicolas
+++ pinetime_introduction [2022/03/01 13:09] (current) – [Development] nicolas
@@ Line 1: / Line 1: @@
-====PineTime - 14/02/22 - 11:58====
+====PineTime - 01/03/22 - 13:00====
 https://wiki.pine64.org/wiki/PineTime
@@ Line 43: / Line 43: @@
 ** CMake - Build make configurations **
-<code bash>https://zbm2.com/dokuwiki/doku.php?id=pinetime_introductionhttps://zbm2.com/dokuwiki/doku.php?id=pinetime_introduction
+<code bash>
 cd ~/Documents/PineTime/InfiniTime/build
-cmake -DARM_NONE_EABI_TOOLCHAIN_PATH=/opt/gcc-arm-none-eabi-9-2020-q2-update/ -DNRF5_SDK_PATH=/opt/nRFSDK -DUSE_OPENOCD=1  ../
+cmake -DARM_NONE_EABI_TOOLCHAIN_PATH=/opt/gcc-arm-none-eabi-9-2020-q2-update/ -DNRF5_SDK_PATH=/opt/nRFSDK -DUSE_OPENOCD=1  ../ sudo apt-get install ninja-build
+ sudo apt-get install ninja-build
 </code>
@@ Line 87: / Line 89: @@
 https://lupyuen.github.io/pinetime-rust-mynewt/articles/cloud#add-github-actions-to-our-fork
-I used the develop work flow main.yml on my fork, all runs well.
+I used the develop work flow main.yml on my fork, all runs well. For the time being I will build locally with VSCode.
 nRF Connect For Mobile app to upload the DFU file or use GadgetBridge.
@@ Line 100: / Line 102: @@
 **Cmake tools extension configuration**
+ run chmod u+x YourScriptFileName.sh
 Cmake: Configure Environment
 Environment variables to pass to CMake during configure.
@@ Line 117: / Line 119: @@
 ====Simulator Setup====
-Install SDL2 https://www.libsdl.org/download-2.0.php
+https://github.com/InfiniTimeOrg/InfiniSim
-https://github.com/NeroBurner/InfiniTime/tree/lv_simulation
-Clone the branch
-<code bash>
-git clone --branch lv_simulation https://github.com/NeroBurner/InfiniTime.git
-cd lv_sim
-git submodule update --init
-</code>
 Build simulator version
 <code bash>
-cd ~/Documents/PineTimeSim/InfiniTime/lv_sim
+cd ~/Documents/PineTimeSim/InfiniSim
 cmake -S . -B build
-cmake --build build --clean-first # Clean first if needed
+cmake --build build -j4 --clean-first # Clean first if needed
 </code>
 Run simulator
 <code bash>
-build/pinesim
+./build/infinisim --hide-status
 </code>
 Commands
-https://github.com/NeroBurner/InfiniTime/blob/84b424cafff4597bca39b5e75a3a596c18852a5a/lv_sim/main.cpp#L632
+Left mouse button: simulates your finger, just click to tap, click and drag to swipe
+Right mouse button: simulates the hardware button (for example turn the screen off or on again)
-    Switch between screens with numbers on the keyboard
+Using the keyboard the following events can be triggered:
-    Right mouse button - Back,Wake up
-    r ... enable ringing
-    R ... disable ringing
-    m ... let motor run for 100 ms
-    M ... stop motor let motor run for max time (255 ms)
-    v ... increase remaining battery by 10 %
-    V ... decrease remaining battery by 10 %
-    c ... battery is charging
-    C ... battery is not charging
+  *r ... enable ringing
+  *R ... disable ringing
+  *m ... let motor run for 100 ms
+  *M ... let motor run for 255 ms
+  *n ... send notification
+  *N ... clear all notifications
+  *b ... connect Bluetooth
+  *B ... disconnect Bluetooth
+  *v ... increase battery voltage and percentage
+  *V ... decrease battery voltage and percentage
+  *c ... charging,
+  *C ... not charging
+  *l ... increase brightness level
+  *L ... lower brightness level
+  *p ... enable print lvgl memory usage to terminal
+  *P ... disable print memory usage
+  *s ... increase step count by 500 steps
+  *S ... decrease step count by 500 steps
+  *h ... set heartrate running, and on further presses increase by 10 bpm
+  *H ... stop heartrate
+====Run Simulator from VSCode====
+Install Ninja
+<code>
+sudo apt-get install ninja-build
+</code>
+Revise VSCode build script - Notes to be added.
+F7 compiles the project F5 launches the simulator
 -----
@@ Line 161: / Line 178: @@
   *Debugging?
-  *Shake to refresh app view
   *Multiple BLE connections? Handling of BLE messages
   *Make hard wired powered dev board?
-**Notes**
-https://zbm2.com/dokuwiki/doku.php?id=pinetime_introduction
+==== Development Notes====
-==== Development====
 InfiniTime uses LVGL Dev 7.11
@@ Line 184: / Line 196: @@
+cd ~/Documents/PineTimeSim/InfiniSim/InfiniTime
+Notes to be looked at!
+Linux BLE daemon
+https://gitea.arsenm.dev/Arsen6331/itd
+[T] <KieranC> pinetime-mcuboot-app.bin is different from pinetime-mcuboot-app-image.bin, the latter contains a header which is needed to boot using the bootloader
+[T] <Avamander> pinetime-app.bin however you can flash at 0x0 and it replaces/skips the bootloader, nice fast debugging!
+[T] <KieranC> You can flash the former at 0x0 and boot without the bootloader but it won't boot if flashed at 0x8
+[T] <Jasmin2o22> Thx mate, perfect (re @KieranC: [M] <jf002> > <@p64protocolbot4:matrix.org> [T] <KieranC> Forwarded from KieranC: I'm doing
+openocd -f interface/stlink.cfg -f target/nrf52.cfg -c 'init' -c 'program bootloader.bin' -c 'reset'
+then
+openocd -f interface/stlink.cfg -f target/nrf52.cfg -c 'init' -c 'program src/pinetime-mcuboot-app-1.6.0.bin' -c 'reset'
+You need to flash a file called pinetime