Differences

This shows you the differences between two versions of the page.

--- pinetime_introduction [2022/02/23 12:48] – nicolas
+++ pinetime_introduction [2022/03/01 13:09] (current) – [Development] nicolas
@@ Line 1: / Line 1: @@
-====PineTime - 24/02/22 - 19:35====
+====PineTime - 01/03/22 - 13:00====
 https://wiki.pine64.org/wiki/PineTime
@@ Line 46: / Line 46: @@
 cd ~/Documents/PineTime/InfiniTime/build
-cmake -DARM_NONE_EABI_TOOLCHAIN_PATH=/opt/gcc-arm-none-eabi-9-2020-q2-update/ -DNRF5_SDK_PATH=/opt/nRFSDK -DUSE_OPENOCD=1  ../
+cmake -DARM_NONE_EABI_TOOLCHAIN_PATH=/opt/gcc-arm-none-eabi-9-2020-q2-update/ -DNRF5_SDK_PATH=/opt/nRFSDK -DUSE_OPENOCD=1  ../ sudo apt-get install ninja-build
+ sudo apt-get install ninja-build
 </code>
@@ Line 87: / Line 89: @@
 https://lupyuen.github.io/pinetime-rust-mynewt/articles/cloud#add-github-actions-to-our-fork
-I used the develop work flow main.yml on my fork, all runs well.
+I used the develop work flow main.yml on my fork, all runs well. For the time being I will build locally with VSCode.
 nRF Connect For Mobile app to upload the DFU file or use GadgetBridge.
@@ Line 159: / Line 161: @@
   *H ... stop heartrate
-F7 compiles the project
+====Run Simulator from VSCode====
-F5 launches the simulator
+Install Ninja
+<code>
+sudo apt-get install ninja-build
+</code>
+Revise VSCode build script - Notes to be added.
+F7 compiles the project F5 launches the simulator
 -----
@@ Line 167: / Line 178: @@
   *Debugging?
-  *Shake to refresh app view
   *Multiple BLE connections? Handling of BLE messages
   *Make hard wired powered dev board?
-==== Development====
+==== Development Notes====
 InfiniTime uses LVGL Dev 7.11
@@ Line 184: / Line 194: @@
 https://docs.lvgl.io/7.11/widgets/label.html
 cd ~/Documents/PineTimeSim/InfiniSim/InfiniTime