Differences

This shows you the differences between two versions of the page.

--- pipistrelle_notes [2023/08/19 14:32] – [Pipistrelle Notes - 14/08/23 - 00:45] nicolas
+++ pipistrelle_notes [2025/04/23 15:36] (current) – [Pipistrelle Notes - 22/04/23 - 15:17] nicolas
@@ Line 1: / Line 1: @@
-====Pipistrelle Notes - 14/08/23 - 00:45====
+====Pipistrelle Notes - 22/04/23 - 15:17====
 **This document is very much a work in progress, None of it is warranted as Correct, Accurate or Optimal.. Suggestions very welcome.**
+===Firmware Update===
+Hold BOOT SEL while plugging in the usb cable
+Drag and dropped pipistrelle_598.uf2
+===Debug Output===
+Microphone
+Recognised as Linux Microphone
+https://play.google.com/store/apps/details?id=com.wildlifeacoustics.SongMeterMiniConfigurator&utm_source=emea_Med
@@ Line 15: / Line 27: @@
 https://hackaday.com/2023/07/14/listening-to-bats-as-they-search-for-food/#comments
+Batogram
+https://www.piwheels.org/project/batogram/
+AudioMoth
+AudioMoth Live install
+chmod +x AudioMothLive
+https://github.com/OpenAcousticDevices/AudioMoth-Firmware-Basic
+https://github.com/OpenAcousticDevices/Datasheets
+https://www.bto.org/our-science/products-and-technologies/bto-acoustic-pipeline
-====Flashing The Radio Master 16S Mk 2 with Latest EdgeTX Firmware====
+====Caving====
+http://marcocorvi.altervista.org/caving/speleoapps/speleoapks/TopoDroidApks.html
-**Ensure USB DFU in plugdev**
-<code bash>
-(echo '# DFU (Internal bootloader for STM32 MCUs)'
- echo 'SUBSYSTEM=="usb", ATTRS{idVendor}=="0483", ATTRS{idProduct}=="df11", MODE="0664", GROUP="plugdev"') | sudo tee /etc/udev/rules.d/45-stdfu-permissions.rules > /dev/null
-</code>
-**Check Current user has USB access**
-**Flash**
-https://buddy.edgetx.org/#/flash?version=v2.8.0
-====Flashing matek2400 to ELRS 3.1.1====
-https://www.expresslrs.org/3.0/quick-start/receivers/matek2400/
-====Flashing The Happy Model ES24TX Module to ELRS 3.1.1====
-https://www.expresslrs.org/3.0/quick-start/transmitters/es24tx/
-Using Method 1
-Run the configurator on linux
-Build
-Download the updated ELRSv3 Lua script.
-Power up the radio then connect USB to browse the SD
-Copy the ELRSv3 Lua script to the radios tools/scripts - also deleted the old one.
-Ensure a model is selected that uses ELRS, to activate the ELRS module.
-Run the new ELRSv3 lua script from tools on the radio. Activate the modules WIFI.
-Copy the re partitioner and firmware to the MacBook and connect to 10.0.0.1 on the radio module
-Choose file greyed out - Browser security. Revised the settings.
-Flash the re partitioner
-Flash the firmware
-Simples!