Differences

This shows you the differences between two versions of the page.

--- rc_notes [2025/10/01 19:35] – [Flashing mateksys PWM ELRS-R24-P6 RX to ELRS 3.6.0] nicolas
+++ rc_notes [2025/10/12 22:36] (current) – [2.4G Conversions] nicolas
@@ Line 2: / Line 2: @@
 **This document is very much a work in progress, None of it is warranted as Correct, Accurate or Optimal.. Suggestions very welcome.**
 ====Flashing The Radio Master 16S Mk 2 with Latest EdgeTX and ELRS Firmware====
@@ Line 32: / Line 34: @@
 M1HOGX
-====Flashing The Happy Model ES24TX Module to ELRS 3.5.4====
+====ELRS Setup/Upgrade using ELRS configurator app====
+https://oscarliang.com/setup-expresslrs-2-4ghz/
+Install the latest version of the ELRS configurator app
+Copy latest ELRS LUA config script to SD /scripts/tools
+https://www.expresslrs.org/quick-start/transmitters/lua-howto/
+====Flashing The Happy Model ES24TX Module to ELRS 3.6.0====
 https://www.expresslrs.org/3.0/quick-start/transmitters/es24tx/
+Radio Master TX16S
 Press SYS, select ExpressLRS, WIFI Connectivity, Enable WIFI
+If you are NOT already using Home WiFi, connect to the ExpressLRS TX WiFi access point (password is expresslrs) and browse http://10.0.0.1/
+Configure to use home network if needed. ELRS Configurator then finds TX as elrs_tx.local
+**Notes **
 Successfully used the modules WIFI (very short range). Use the ELRS configurator app, to generate a gzipped bin if needed to avoid the not enough space error.
-If you are NOT using Home WiFi, connect to the ExpressLRS TX WiFi access point (password is expresslrs) and navigate your browser to http://10.0.0.1/.
+May need to use configurator to generate firmware first, then connect to device wifi.
 ====Flashing The Happy Model ES24TX BackPack firmware to 1.5.2====
@@ Line 48: / Line 69: @@
 Use the ELRS configurator app, to generate the backpack firmware.
-If you are NOT using Home WiFi, connect to the ExpressLRS TX Backpack WiFi access point (password is expresslrs) and navigate your browser to http://10.0.0.1/.
+If you are NOT already using Home WiFi, connect to the ExpressLRS TX Backpack WiFi access point (password is expresslrs) and browse http://10.0.0.1/
-====ELRS Setup/Upgrade using ELRS configurator app====
-https://oscarliang.com/setup-expresslrs-2-4ghz/
-Copy latest ELRS LUA config script to SD /scripts/tools
-https://www.expresslrs.org/quick-start/transmitters/lua-howto/
+Configure to use home network if needed. ELRS Configurator then finds TX Backpack as elrs_tx.local
 ----
-====Flashing matek2400 RX to ELRS 3.4.3====
+====Flashing matek2400 RX to ELRS 3.6.0====
 https://www.expresslrs.org/3.0/quick-start/receivers/matek2400/
-Flashing the RX may clears its config! Check/Reset Model match, web config time out etc.
+Flashing the RX clears its config! Check/Reset Model match, web config time out etc.
 ====Flashing RX CRSF to PWM board to latest 2.6.0 firmware====
@@ Line 69: / Line 84: @@
 https://www.mateksys.com/?portfolio=crsf-pwm#tab-id-7
+----
 ====Flashing mateksys PWM ELRS-R24-P6 RX to ELRS 3.6.0====
@@ Line 75: / Line 91: @@
 Use - HappyModel EPW6 2.4GHz PWM RX Firmware
 Set binding phrase, erase and force flash
+Flashing the RX clears its config! Check/Reset Model match, web config time out etc.
 ----
@@ Line 86: / Line 104: @@
 ----
@@ Line 105: / Line 117: @@
 Conversion/Vintage PPM Utils
+https://www.mccrash-racing.co.uk/sc/sc24g.htm
 https://mode-zero.uk/viewforum.php?f=7