===Elegoo=== 

STL Repair
https://formware.co/OnlineStlRepair

Todo
https://github.com/SoftFever/OrcaSlicer/wiki/Calibration
Slicer VFA calibration print 
Measure filament 


1.72 or 1.75 mm

===Prusa Slicer with custom profile=== 

https://www.youtube.com/watch?v=g_R2IQhyy18&t=3801s

https://www.dr-lex.be/software/ffcp-slic3r-profiles.html#download

"/home/nicolas/usr/local/PrusaSlicer/FFCP/make_fcp_x3g.pl";

/home/nicolas/usr/local/PrusaSlicer/FFCP/make_fcp_x3g.txt

cd /home/nicolas/usr/local/PrusaSlicer/FFCP/
./make_fcp_x3g.pl '/home/nicolas/Documents/Yachts/smoothypart1/files/ToPrint_-_Hull_Front.gcode' 

=== Ringing and Acceleration ===

https://www.thingiverse.com/groups/flashforge/forums/general/topic:9670#google_vignette

https://www.thingiverse.com/groups/flashforge/forums/general/topic:24907

FlashForge Creator PRO configuration
ATMega 2560
sailfish 7.8 r0f02f

With this version of sailfish Accelerator settings are only controlled via printer eeprom settings, Gcode is ignored

Loaded
Replicator (2015)
https://www.thingiverse.com/thing:32084/files#google_vignette

Connect, then accelerator settings

Settings
https://cdn.thingiverse.com/assets/32/b8/3c/35/b7/RepG-AccelSettings.png

These setting did not appear to make much/any difference.

Loaded 
A recent version of FlashForge sliced.

Various test prints

Just seem to be swapping one type of print artifact for another. Some sections of the flash forge sliced part are perfect, the same sections sliced by Prusa are poorer, etc.


===Cura===

Older Version of Cura
 
https://github.com/Ultimaker/Cura/releases/tag/5.6.0

Which has a profile 

https://github.com/eugr/Flashforge-for-Cura?tab=readme-ov-file


Overhangs curling upwards


If curling happens in places that have no bed contact: Too much cooling.

Try reducing cooling to 50%
Raise nozzle temp to 200C
Lower board temp to 50C

Last but not least: in Cura, there is a "Z Seam Alignment" option that I now use, and would suggest anyone to set on "random" (it isn't by default)


Default
First layer 211, 212
Bed 65, 64
Bridge fan speed 80
1.69
Max print speed 80

Revised
Bridge fan speed 100
First layer 200, 200
Bed 61, 60
Max print speed 60


===Elegoo===

Slicer VFA calibration print