ZBM2

Thanks for your BlueShot Interface order – Chrony Version. It is currently available for Android (4+) and has a USB C connector, so it plugs directly into your phone without an extra adapter.

Please note the Chrono is not included.

Which Android device are you planning to use it with?

A list of phones we have tested can be found at http://www.zbm2.com/blueshot/phone.html USB OTG support is required

Please confirm you require the USB C version Please consider rating and reviewing the app. I am also very keen to hear what you think of the app and BlueShot and of course if you have any questions. I would be very interested to hear how you heard about BlueShot. Thanks! Regards Nicolas Hi, Thanks for your BlueShot Interface order - Combro Version. It is currently available for Android (4+) and has a USB C connector, so it plugs directly into your phone without an extra adapter. Please note the Chrono is not included. Which Android device are you planning to use it with? A list of phones we have tested can be found at http://www.zbm2.com/blueshot/phone.html USB OTG support is required Please confirm you require the USB C version

Please consider rating and reviewing the app. I am also very keen to hear what you think of the app and BlueShot and of course if you have any questions.

I would be very interested to hear how you heard about BlueShot.

Thanks!

Regards Nicolas

Hi,

Thanks for your BlueShot Interface order - Combro Version. It is currently available for Android (4+) and has a micro USB connector, so it plugs directly into your phone without an extra adapter. Please note the Chrono is not included.

Which Android device are you planning to use it with?

A list of phones we have tested can be found at http://www.zbm2.com/blueshot/phone.html USB OTG support is required and micro usb socket, USB C can be supplied to order

Do you require the Micro USB or USB C version? Please consider rating and reviewing the app. I am also very keen to hear what you think of the app and BlueShot and of course if you have any questions. I would be very interested to hear how you heard about BlueShot. Thanks! Regards Nicolas Hi, Thanks for your BlueShot Interface order - Combro Version. It is currently available for Android (4+) and has a USB C connector, so it plugs directly into your phone without an extra adapter. Please note the Chrono is not included. Which Android device are you planning to use it with? A list of phones we have tested can be found at http://www.zbm2.com/blueshot/phone.html Please confirm you require the USB C version? Please consider rating and reviewing the app. I am also very keen to hear what you think of the app and BlueShot and of course if you have any questions. I would be very interested to hear how you heard about BlueShot. Thanks! Regards Nicolas

Unfortunately there are currently considerable postage delays, it will arrive. Thanks for your patience. Sorry. These are challenging times.

Nicolas

Any questions or feedback on BlueShot I would love to hear from you. I developed the software and hardware, which continues to evolve driven by shooter feedback.   https://www.zbm2.com/blueshot/

BlueShot grew out of my brothers tuning experiments.  https://theywalkamongstus.co.uk/airguns/airguns.html

I just want to ensure everyone is happy with BlueShot.

Nicolas

From the BlueShot Menu (Top right vertical 3 dots) Select Settings, scroll down to “USB OTG Settings” and select your Chrono. The default is Combro. Exit the app completely and unplug BlueShot Replug BlueShot and start the app Connect to the F1 main unit/display Test Please let me know how it goes. I am keen to ensure BlueShot works smoothly for you. Thanks Nicolas

Reinstalling the app is the first thing. Worth repeating that Before connecting the Combro. Triple check the plug in connection to the phone, It should launch the app. If the phone has a case sometimes this can cause the plug not to connect. The USB C plug will need to go directly into the phone, adapters rarely work. The light should come on the interface and the app should show connected. Triple check the Combro is securely plugged in and that Combro is selected in the settings. You can send a test shot with these instructions Can I test my BlueShot app, BlueShot interface and Combro without firing a pellet?

If you hold down the RST button of the Combro for a good few seconds it starts cycling through various options, wait until you get to SND, stop at this point, and then press FPS or PDS to send a test shot. This should register on the BlueShot app.

1. Remove and reinstall BlueShot from Google Play 2. Carefully Plug the USB connector of the BlueShot Interface into your phone. Ensure it is seated correctly not against case etc.  3. The LED in the BlueShot interface will light up. Is this happening?  4. The Message “Open BlueShot when this USB device is connected” will be displayed. Select “Use by default for this USB device” then select “OK”. 5. The BlueShot app will then start and will show “Connected OTG” in the top left hand corner of the main screen, indicating the BlueShot interface is connected. 6. From the BlueShot Menu (Top right vertical 3 dots) Select Settings, scroll down to “USB OTG Settings” and select your Chrono. The default is Combro.  7. Change any other settings, pellet weight, gun name etc as required. 8. Return to the main BlueShot screen. It should show “Ready For Shot”  9. If you have changed the Chrono type you will need to completely close the app, then unplug and replug the BlueShot interface to change the Chrono settings. 10. Connecting your chrono Combro Chronograph Carefully plug the BlueShot interface into the your Combro ensuring the trailing lead from the plug faces downwards. Switch on your Combro Chrono - While connected to your BlueShot interface it does not require batteries.  Either fire a shot or use the test mode of the Combro.  Do let me know how it goes, I am keen to ensure BlueShot works well for you. Nicolas Hi, They usually need a firm ish press in but then retain OK. Unfortunately Combro did not pick the best connector, so if it is still loose one thing you can adjust is to “very” carefully prise the combo pins very slightly further apart, this should ensure a tight fit. Do let me know how it goes. I am keen to ensure you are happy with BlueShot.

Nicolas

BlueShot

Thanks for your order. The lead side connecting to the Combro is approx 6ft long, then the small BlueShot interface box then about 4 inches of USB which connects to your phone. It is all in one piece, no fiddly adapters. Is this OK? 

Nicolas

Hi,

You will need a Chronograph the Combro is the one I would recommend. Then load the Android BlueShot app and purchase a BlueShot interface to connect your Combro to your phone and the BlueShot app More info here https://www.zbm2.com/blueshot/index.html

Just ask if you have any questions Nicolas

Hi,

Thanks for your feedback, really pleased you like the BlueShot app

The BlueShot app is designed to work with the BlueShot interface providing a proven software and hardware combination, third party USB interfaces are not supported.  

For the best price on a BlueShot interface with free postage. https://www.zbm2.com/blueshot/

Thanks. Any questions at all just ask.

Nicolas 

Sorry just for Android due to Apple restrictions. Although it will run on almost any Android device, somebody may well have a “draw find” that will run it fine. The data can be easily emailed if needed. If you have any more questions please just ask Thanks Nicolas