ZBM2

BlueShot app on Google Play
Video and information about BlueShot

Purchase from our Online Shop we ship worldwide, please contact us if you have any comments or questions or need to pay extra postage.

1. Install BlueShot from Google Play
2. Carefully Plug the micro/C USB connector of the BlueShot Interface into your phone. The LED in the BlueShot interface will light up.
3. The Message “Open BlueShot when this USB device is connected” will be displayed. Select “Use by default for this USB device” then select “OK”.
4. The BlueShot app will then start and will show “Connected OTG” in the top left hand corner of the main screen, indicating the BlueShot interface is connected.
5. From the BlueShot Menu (Top right vertical 3 dots) Select Settings, scroll down to “USB OTG Settings” and select your Chrono. The default is Combro.
6. Change any other settings, pellet weight, gun name etc as required.
7. Return to the main BlueShot screen.
8. If you have changed the Chrono type you will need to completely close the app, then unplug and replug the BlueShot interface to change the Chrono settings.

Combro Chronograph

Remove the batteries from your Combro as they are no longer required. Carefully plug the BlueShot interface into the your Combro ensuring the trailing lead from the plug faces downwards. Switch on your Combro Chrono - While connected to your BlueShot interface it does not require batteries. Take a test shot. Your shots will be logged

Chrony Chronograph

Carefully plug the BlueShot interface into the your Chrony Switch on your Chrony - Note the Chrony still requires batteries. Take a test shot. Your shots will be logged

Press the menu key or menu “softkey” then Settings. This displays all the apps settings - Gun name, pellet weight, display etc.

Most Android 7.0 and later devices will work. However, not all devices fully support USB OTG and due to the huge range of devices and firmware there is not a complete list available. Please contact us if you need more information. Check our Supported Phones

The popular Combro and the Chrony (F1, Master, Beta etc) are supported.

If you have a USB OTG adapter and a mouse, and that combination works on you device it is most likely that BlueShot will also work.

On some Android phones the USB OTG function can become deactivated. Sometimes charging the phone via USB through the computer instead off the charger can cause this. Typically the BlueShot light will not come on and the BlueShot app will not launch.

Plug in BlueShot, then switch off the phone, then restart the phone with BlueShot still connected, when it starts it will ask if you wish to connect to BlueShot, after you have confirmed yes, you can then disconnect and reconnect as normal. This video shows the USB OTG not active issue - http://youtu.be/JevEyriLXZ0 Thanks Paul for this tip!

The Combro is an excellent chrono, produced for many years and a great option for air rifle use. Unfortunately the designers chose to use just 3 tiny bare pins for it's computer interface, which requires a small custom plug with an interference fit to connect.

The BlueShot plug and lead has been carefully designed and refined to make the best of this Combro connection.

For best results

Ensure the plug is carefully aligned with the cable hanging downwards and firmly press it home.

If the plug is still loose shooters have used a small screwdriver to “very” carefully and “very” slightly splay one of the outside edge pins on the Combro. (Please note this is at your own risk. We can't repair Combros!)

This will also be reported in the BlueShot app, but you do not need to manually clear the message. Just keep shooting, the next valid shot will be recorded correctly.

Unfortunately all the micro USB to USB C adapters we have tried do not work with USB On The Go which is used by BlueShot. Triple check that USB C OTG is enabled, as some phones disable this feature by default. You could try another adapter. Failing this I can supply you with a BlueShot USB C version at a discount.

The lead could be made interchangeable, but it adds to complexity and would introduce another point of failure. However. We can supply a BlueShot that has - both leads - already connected to it, so either Chrono can be connected. We would be happy to offer this as an upgrade to an existing BlueShot interface or when purchased, contact us for details.

When used with the Combro the phone powers the Combro, so it does not need a battery installed. When used with the Chrony the phone cannot power the Chrony - The Chrony still requires a battery.

All the shot data is saved on the phone as the shot is taken, so you can switch off, remove the battery! etc. and the data will be retained. One set of data is currently stored on the phone. If you have finished one shot string and you have no internet connection you can use the export option anyway as the email and data are prepared then will remain in the “outbox” until your phone is connected to the internet again. Meanwhile you can delete the shot string and start a new one.

The sending option can be changed in Android system settings - Settings, Apps and notifications, default apps, see if Bluetooth is there - if so select it and clear defaults. Then next time you export you can select email.

We will offer a refund of the purchase price if it does not work with your device. Just send the BlueShot back to us (signed and within a week please) and we will refund the purchase price.

Interesting point. Not actually tried it but broadly I see no reason why the .csv file stored on the device could not be picked up by an Office style app running on the device. I will investigate and report back.

The BlueShot App does not support any other USB cables. To ensure reliability our BlueShot App uses custom software drivers and the BlueShot Interface with a micro USB or USB C plug so no other adapters are needed.

BlueShot is supplied with a either a USB C or Micro B USB plug please specify when ordering

If you hold down the RST button of the Combro for a good few seconds it starts cycling through various options, wait until you get to SND, stop at this point, and then press FPS or PDS to send a test shot. This should register on the BlueShot app.

The best method I have found is to “fire” an elastic band between the two sensors. It seems to work fine in bright room lighting. This should register on the Chrony and on the BlueShot app. If “Debug is enabled in settings the Chrony will send a copyright message when switched on. If everything is correctly connected this message will briefly display on the BlueShot app screen.

First thing to try is to completely remove the BlueShot app restart the phone and the reinstall it. System updates can sometimes cause issues. Triple check the BlueShot is securely plugged in - not fouling against the phone case for example. Please contact us as we want to ensure BlueShot works well for you.

There are a number of different string export formats available depending on how you intend to use the data. They are listed in Settings, Export Format

The most frequently used options are -

• Shot String - Comma delimited - The default and most suitable for use in spreadsheets.
• Shot List - Shot Velocity Energy Diff - Provides a similar list to the app display.

If there is another particular format you need please contact us.

On some recent Android 11 and 12 devices emailing a shot string does not attach the shot string file. Google has changed the file permission process again(!)

While this is investigated from the BlueShot app -

• Select Email shots
• Select Attach File (top right)
• Open from will appear on the left, or select the top left list icon
• Select your device name from the list
• Select the BlueShotData folder
• Select the ShotString file you need
• Top right to send email as normal

Email closes and returns to the BlueShot app.

BlueShot requires an Android phone or tablet version 4.0 or above that supports USB OTG (On The Go) and is a Google Supported Device using Google Play services. Most recent Android phones or tablets from the major manufacturers are supported.

However, due to a number of devices, particularly inexpensive tablets and phones that are not always fully supported by Google, have custom ROM's etc, please check with us if you are unsure of the suitability of your device.

BlueShot uses the raw data from the Combro. The BlueShot pellet weight allows an extra decimal place and the FPS/Foot Pound calculations are done to a slightly greater precision (more decimal places) than the Combro display. These factors can lead to a very slight difference between the Combro and BlueShot displays.

Pressing the back button from the BlueShot main screen does not completely close the application, it is just paused. Most Android applications work this way, as they will only be closed by the system if resources are low. This enables recently used apps to be quickly resumed without having to completely restart.

Pressing the home button from any screen pauses the app and returns you to the Android Home screen. Next time you press the BlueShot icon, it will quickly resume where you left off.

You will need to go to the Android system settings - Android Settings, Apps.

Then select the default app that has been set for email, in this case Drive, select it and in the launch by default section select clear defaults. This will give you the choice of apps again when you select email from within the BlueShot app.

Please contact us if you have any comments or suggestions. BlueShot has developed as the result of feedback from keen shooters worldwide. Thanks!

© ZBM2 Software 2025