ZBM2

This document is very much a work in progress, None of it is warranted as Correct, Accurate or Optimal.. Suggestions very welcome.

https://www.bto.org/our-science/products-and-technologies/bto-acoustic-pipeline/how-acoustic-pipeline-works

SD Card

Ensure USB DFU in plugdev

(echo '# DFU (Internal bootloader for STM32 MCUs)'
 echo 'SUBSYSTEM=="usb", ATTRS{idVendor}=="0483", ATTRS{idProduct}=="df11", MODE="0664", GROUP="plugdev"') | sudo tee /etc/udev/rules.d/45-stdfu-permissions.rules > /dev/null

Check Current user has USB access

Flash

https://buddy.edgetx.org/#/flash?version=v2.8.0

https://www.expresslrs.org/3.0/quick-start/receivers/matek2400/

https://www.expresslrs.org/3.0/quick-start/transmitters/es24tx/

Using Method 1

Run the configurator on linux

Build

Download the updated ELRSv3 Lua script.

Power up the radio then connect USB to browse the SD

Copy the ELRSv3 Lua script to the radios tools/scripts - also deleted the old one.

Ensure a model is selected that uses ELRS, to activate the ELRS module.

Run the new ELRSv3 lua script from tools on the radio. Activate the modules WIFI.

Copy the re partitioner and firmware to the MacBook and connect to 10.0.0.1 on the radio module

Choose file greyed out - Browser security. Revised the settings.

Flash the re partitioner

Flash the firmware

Simples!