Differences

This shows you the differences between two versions of the page.

--- 3d_printing [2024/11/09 16:59] – nicolas
+++ 3d_printing [2025/09/21 11:16] (current) – nicolas
@@ Line 1: / Line 1: @@
+===Elegoo===
+STL Repair
+https://formware.co/OnlineStlRepair
+Todo
+https://github.com/SoftFever/OrcaSlicer/wiki/Calibration
+Slicer VFA calibration print
+Measure filament
-https://www.dr-lex.be/software/ffcp-slic3r-profiles.html#download
+.72 or 1.75 mm
+===Prusa Slicer with custom profile===
+https://www.youtube.com/watch?v=g_R2IQhyy18&t=3801s
+https://www.dr-lex.be/software/ffcp-slic3r-profiles.html#download
+"/home/nicolas/usr/local/PrusaSlicer/FFCP/make_fcp_x3g.pl";
 /home/nicolas/usr/local/PrusaSlicer/FFCP/make_fcp_x3g.txt
+cd /home/nicolas/usr/local/PrusaSlicer/FFCP/
+./make_fcp_x3g.pl '/home/nicolas/Documents/Yachts/smoothypart1/files/ToPrint_-_Hull_Front.gcode'
+=== Ringing and Acceleration ===
+https://www.thingiverse.com/groups/flashforge/forums/general/topic:9670#google_vignette
+https://www.thingiverse.com/groups/flashforge/forums/general/topic:24907
+FlashForge Creator PRO configuration
+ATMega 2560
+sailfish 7.8 r0f02f
+With this version of sailfish Accelerator settings are only controlled via printer eeprom settings, Gcode is ignored
+Loaded
+Replicator (2015)
+https://www.thingiverse.com/thing:32084/files#google_vignette
+Connect, then accelerator settings
+Settings
+https://cdn.thingiverse.com/assets/32/b8/3c/35/b7/RepG-AccelSettings.png
+These setting did not appear to make much/any difference.
+Loaded
+A recent version of FlashForge sliced.
+Various test prints
+Just seem to be swapping one type of print artifact for another. Some sections of the flash forge sliced part are perfect, the same sections sliced by Prusa are poorer, etc.
+===Cura===
+Older Version of Cura
+https://github.com/Ultimaker/Cura/releases/tag/5.6.0
+Which has a profile
+https://github.com/eugr/Flashforge-for-Cura?tab=readme-ov-file
+Overhangs curling upwards
+If curling happens in places that have no bed contact: Too much cooling.
+Try reducing cooling to 50%
+Raise nozzle temp to 200C
+Lower board temp to 50C
+Last but not least: in Cura, there is a "Z Seam Alignment" option that I now use, and would suggest anyone to set on "random" (it isn't by default)
 Default
@@ Line 13: / Line 83: @@
 Bed 65, 64
 Bridge fan speed 80
+.69
+Max print speed 80
 Revised
+Bridge fan speed 100
 First layer 200, 200
 Bed 61, 60
+Max print speed 60
+===Elegoo===
+Slicer VFA calibration print