Differences

This shows you the differences between two versions of the page.

--- 3d_printing [2025/07/28 11:34] – nicolas
+++ 3d_printing [2025/09/21 11:16] (current) – nicolas
@@ Line 1: / Line 1: @@
+===Elegoo===
+STL Repair
+https://formware.co/OnlineStlRepair
+Todo
+https://github.com/SoftFever/OrcaSlicer/wiki/Calibration
+Slicer VFA calibration print
+Measure filament
 .72 or 1.75 mm
-Smoothy
+===Prusa Slicer with custom profile===
-https://www.youtube.com/watch?v=g_R2IQhyy18&t=3801s
+https://www.youtube.com/watch?v=g_R2IQhyy18&t=3801s
 https://www.dr-lex.be/software/ffcp-slic3r-profiles.html#download
 "/home/nicolas/usr/local/PrusaSlicer/FFCP/make_fcp_x3g.pl";
 /home/nicolas/usr/local/PrusaSlicer/FFCP/make_fcp_x3g.txt
------
 cd /home/nicolas/usr/local/PrusaSlicer/FFCP/
 ./make_fcp_x3g.pl '/home/nicolas/Documents/Yachts/smoothypart1/files/ToPrint_-_Hull_Front.gcode'
-Ringing
+=== Ringing and Acceleration ===
 https://www.thingiverse.com/groups/flashforge/forums/general/topic:9670#google_vignette
 https://www.thingiverse.com/groups/flashforge/forums/general/topic:24907
-Running
+FlashForge Creator PRO configuration
 ATMega 2560
 sailfish 7.8 r0f02f
@@ Line 37: / Line 46: @@
 https://cdn.thingiverse.com/assets/32/b8/3c/35/b7/RepG-AccelSettings.png
-These setting did not appear to make much difference.
+These setting did not appear to make much/any difference.
 Loaded
-A recent version of FlashForge
+A recent version of FlashForge sliced.
-Older Version of Cura
+Various test prints
+Just seem to be swapping one type of print artifact for another. Some sections of the flash forge sliced part are perfect, the same sections sliced by Prusa are poorer, etc.
+===Cura===
+Older Version of Cura
 https://github.com/Ultimaker/Cura/releases/tag/5.6.0
 Which has a profile
 https://github.com/eugr/Flashforge-for-Cura?tab=readme-ov-file
+Overhangs curling upwards
+If curling happens in places that have no bed contact: Too much cooling.
+Try reducing cooling to 50%
+Raise nozzle temp to 200C
+Lower board temp to 50C
+Last but not least: in Cura, there is a "Z Seam Alignment" option that I now use, and would suggest anyone to set on "random" (it isn't by default)
@@ Line 62: / Line 91: @@
 Bed 61, 60
 Max print speed 60
+===Elegoo===
+Slicer VFA calibration print