This is an old revision of the document!
1.72 or 1.75 mm
Smoothy https://www.youtube.com/watch?v=g_R2IQhyy18&t=3801s
https://www.dr-lex.be/software/ffcp-slic3r-profiles.html#download
“/home/nicolas/usr/local/PrusaSlicer/FFCP/make_fcp_x3g.pl”;
/home/nicolas/usr/local/PrusaSlicer/FFCP/make_fcp_x3g.txt
cd /home/nicolas/usr/local/PrusaSlicer/FFCP/ ./make_fcp_x3g.pl '/home/nicolas/Documents/Yachts/smoothypart1/files/ToPrint_-_Hull_Front.gcode'
Ringing https://www.thingiverse.com/groups/flashforge/forums/general/topic:9670#google_vignette
https://www.thingiverse.com/groups/flashforge/forums/general/topic:24907
Running ATMega 2560 sailfish 7.8 r0f02f
With this version of sailfish Accelerator settings are only controlled via printer eeprom settings, Gcode is ignored
Loaded Replicator (2015) https://www.thingiverse.com/thing:32084/files#google_vignette
Connect, then accelerator settings
Settings https://cdn.thingiverse.com/assets/32/b8/3c/35/b7/RepG-AccelSettings.png
Default First layer 211, 212 Bed 65, 64 Bridge fan speed 80 1.69 Max print speed 80
Revised Bridge fan speed 100 First layer 200, 200 Bed 61, 60 Max print speed 60