This is an old revision of the document!
1.72 or 1.75 mm
Prusa Slicer with custom profile
https://www.youtube.com/watch?v=g_R2IQhyy18&t=3801s
https://www.dr-lex.be/software/ffcp-slic3r-profiles.html#download
“/home/nicolas/usr/local/PrusaSlicer/FFCP/make_fcp_x3g.pl”;
/home/nicolas/usr/local/PrusaSlicer/FFCP/make_fcp_x3g.txt
cd /home/nicolas/usr/local/PrusaSlicer/FFCP/ ./make_fcp_x3g.pl '/home/nicolas/Documents/Yachts/smoothypart1/files/ToPrint_-_Hull_Front.gcode'
Ringing and Acceleration
https://www.thingiverse.com/groups/flashforge/forums/general/topic:9670#google_vignette
https://www.thingiverse.com/groups/flashforge/forums/general/topic:24907
FlashForge Creator PRO configuration ATMega 2560 sailfish 7.8 r0f02f
With this version of sailfish Accelerator settings are only controlled via printer eeprom settings, Gcode is ignored
Loaded Replicator (2015) https://www.thingiverse.com/thing:32084/files#google_vignette
Connect, then accelerator settings
Settings https://cdn.thingiverse.com/assets/32/b8/3c/35/b7/RepG-AccelSettings.png
These setting did not appear to make much/any difference.
Loaded A recent version of FlashForge sliced.
Various test prints
Just seem to be swapping one type of print artifact for another. Some sections of the flash forge sliced part are perfect, the same sections sliced by Prusa are poorer, etc.
Cura
Older Version of Cura
https://github.com/Ultimaker/Cura/releases/tag/5.6.0
Which has a profile
https://github.com/eugr/Flashforge-for-Cura?tab=readme-ov-file
Default First layer 211, 212 Bed 65, 64 Bridge fan speed 80 1.69 Max print speed 80
Revised Bridge fan speed 100 First layer 200, 200 Bed 61, 60 Max print speed 60